{"id":3514,"date":"2026-10-21T14:50:49","date_gmt":"2026-10-21T06:50:49","guid":{"rendered":"http:\/\/www.golfgalaxi.com\/blog\/?p=3514"},"modified":"2026-10-21T14:50:49","modified_gmt":"2026-10-21T06:50:49","slug":"how-to-control-the-shrinkage-rate-of-pet-thermoformed-felt-materials-4c16-94763f","status":"publish","type":"post","link":"http:\/\/www.golfgalaxi.com\/blog\/2026\/10\/21\/how-to-control-the-shrinkage-rate-of-pet-thermoformed-felt-materials-4c16-94763f\/","title":{"rendered":"How to control the shrinkage rate of PET thermoformed felt materials?"},"content":{"rendered":"

What\u2019s up, folks? If you\u2019re in the packaging, automotive insulation, or even the shoe component game, you\u2019ve probably run into PET thermoformed felt materials. They\u2019re super versatile\u2014light, durable, cost-effective, and way more eco-friendly than a lot of synthetic alternatives. But let\u2019s be real, the biggest headache we deal with every single day is shrinkage. One wrong step, and that once-perfect thermoformed part starts pulling, warping, or shrinking way more than it should. You end up with parts that don\u2019t fit their molds, gaps in assembly, or even whole batches you have to scrap. As a supplier who\u2019s been deep in this game for over a decade, I\u2019ve seen every shrink-related nightmare you can imagine. Today, I\u2019m breaking down exactly how we control shrinkage for our PET thermoformed felt materials\u2014no fancy jargon, just real, actionable stuff that works. PET Thermoformed Felt Materials<\/a><\/p>\n

<\/p>\n

First off, let\u2019s get one thing straight: shrinkage in PET felt isn\u2019t some random magic trick. It\u2019s all about polymer chains and how you handle them through every step of production. When PET is heated up for thermoforming, those molecular chains loosen up, stretch, and then try to go back to their original, relaxed state once they cool. That\u2019s the core of shrinkage. So, our entire process is built around taming those chains before they ever hit your production line. No shortcuts here\u2014every little choice we make adds up to tighter control over shrink rates.<\/p>\n

Let\u2019s start with the raw material, because you can\u2019t polish a turd, right? We don\u2019t just grab any PET resin off the shelf. We work with a specific grade of post-consumer and industrial recycled PET (PCR and IPCR) that\u2019s been specially processed to have low inherent shrink potential. A lot of suppliers cut corners here\u2014they use cheap resin that\u2019s not properly dried or has inconsistent molecular weight. Inconsistent molecular weight means some chains are longer than others, and they shrink at totally different rates. That\u2019s a recipe for disaster. We test every resin batch for intrinsic viscosity (IV) before we even bring it in. IV measures how tangled the polymer chains are\u2014higher, consistent IV means more uniform chains, which shrink the same amount. We aim for an IV of 0.75 to 0.85 dL\/g for our felt materials; any lower and you get too much flow during forming, any higher and the felt gets too rigid, leading to uneven cooling and extra shrink. Also, we make sure the moisture content is below 50 ppm before processing. If there\u2019s even a tiny bit of water in the resin, it boils when heated, causing voids that mess with molecular alignment. That\u2019s a basic step, but you\u2019d be shocked how many suppliers skip it to save time.<\/p>\n

Next, the felt production line itself. When we\u2019re making the non-woven PET felt that goes into thermoforming, we use a needle-punch process, but we don\u2019t just punch randomly. Needle density and depth have a huge impact on shrinkage. Too few needles, and the felt is loose\u2014chains can shift more during thermoforming, leading to big shrink. Too many needles, and the felt is over-compressed, which causes uneven stretching and cooling. We dial in a needle density of about 1,200 needles per square inch, with a penetration depth of 10 mm for our standard 3 mm thick felt. That\u2019s the sweet spot we landed on after thousands of trials. Also, we apply a controlled amount of tension during the felting and drying stages. Tension keeps the polymer chains aligned in a consistent direction, so when we thermoform, they stretch evenly and cool evenly. If there\u2019s no tension, the felt relaxes, and you get way more shrink\u2014sometimes up to 15% vs. our target of less than 3%. We also don\u2019t use any unnecessary coatings here. A lot of suppliers add stiffening coatings that trap heat during cooling, making shrink worse. Our coatings are minimal, only to add water resistance if you want it, and we test every batch to make sure they don\u2019t mess with shrink rates.<\/p>\n

Now, the big one: thermoforming parameters. This is where we\u2019ve actually tweaked our machines over the years, and it\u2019s the biggest driver of shrink control. Let\u2019s break this down step by step. First, heating the felt. We use a combination of IR ovens and contact heating, not just one or the other. IR heats the surface evenly, but contact heating (using heated plates that press gently on both sides of the felt) gets the inner layers hot enough without overheating the surface. If you overheat the surface, it can melt unevenly, and if the core is too cool, you get inconsistent stretching. We target a forming temperature of 160\u2013170\u00b0C for our felt. PET\u2019s glass transition temperature is around 70\u00b0C, so above that it\u2019s pliable, but below its melting point (~250\u00b0C), so we don\u2019t have to worry about holes or deformation. We also control the heating time\u2014no cranking the heat to get it done faster. Our heating time is 45 seconds for 3 mm thick felt, 60 seconds for 5 mm. This gives every part of the felt time to heat uniformly, so all chains are ready to stretch at the same rate.<\/p>\n

Then, forming pressure and mold design. This is where a lot of people mess up. If you use too much pressure during thermoforming, you stretch the chains way too much, and when they cool, they snap back with extra force, leading to shrink as high as 8%. If pressure is too low, the felt doesn\u2019t take the mold shape evenly, leading to uneven cooling and lopsided shrink. We use a vacuum forming process with a pressure of 20 psi and a vacuum level of 25 inHg. That\u2019s enough to push the felt tight to the mold without over-stretching it. And our molds are designed with a slight draft\u2014about 1.5% taper on all sides. That\u2019s not just for easy part removal; the draft gives the material a little space to cool and relax evenly, so it doesn\u2019t pull tight against the mold wall and shrink more. We also add small vent holes in the mold (1 mm every 2 inches) to let trapped air escape during forming. Trapped air creates gaps between the felt and the mold, so parts of the felt cool slower, leading to uneven shrink.<\/p>\n

Cooling is the most underrated step in shrink control. Most people think \u201ccool as fast as possible\u201d to get parts out and move on. But fast, uneven cooling is the #1 cause of uneven shrink. If the outside of the felt hits a cold mold and hardens right away, while the inside is still warm, the inner layers shrink more as they cool, warping the whole part. We use a two-stage cooling process. First, we let the part cool in the mold for 2 minutes at a controlled room temperature of 22\u00b0C and 50% humidity. That slow, even cooling starts from the outside in, so all layers solidify at almost the same rate. Then, we take the part out and let it air-condition for another 24 hours in our climate-controlled warehouse before we ship it. This \u201cannealing\u201d step lets any residual stress in the polymer chains release slowly, so when you get the part, it\u2019s already stabilized. We track shrinkage for every batch during this cooling period\u2014our in-house quality team measures dimensions before cooling, right after mold removal, and after 24 hours of air-conditioning. We reject any batch that has a shrink rate over 2.5%\u2014that\u2019s our guarantee. No exceptions.<\/p>\n

Wait, but what if you\u2019re using the felt on your end, and you\u2019re dealing with shrinkage in your own process? I hear you\u2014sometimes the problem isn\u2019t the felt itself, it\u2019s how you\u2019re thermoforming it at your facility. A lot of our customers call us saying their parts are shrinking, but they\u2019re heating the felt too fast, or using a mold with no draft. So I also give them tips for their end: first, pre-heat the felt before forming to make sure it\u2019s evenly heated, no cold spots. Second, use a mold with a 1\u20132% draft. Third, cool the part in the mold for at least 90 seconds before removing it, and let it sit for 24 hours before trimming or assembling. We even provide a free quick-start guide for that, because we want our customers to succeed too, not just sell them material.<\/p>\n

Another thing we do is batch consistency testing. Every 10th batch of felt we produce, we run shrinkage tests in-house and at a third-party lab to make sure we\u2019re holding to our standards. We measure shrink along the machine direction (MD) and cross direction (CD), because sometimes shrink is different along those axes. For our standard felt, MD shrink is 1.2\u20132.0% and CD is 0.8\u20131.5%\u2014super tight, way below the industry average of 3\u20135%. If a batch falls outside that, we don\u2019t ship it. We rework it by re-heating and re-calendering to adjust the chain alignment, so even if something goes wrong, we don\u2019t waste it or send bad parts to you.<\/p>\n

Let\u2019s be real, shrinkage is never going to be zero. PET has molecular chains that want to relax, so a tiny amount is normal. But the goal is to make that shrinkage predictable and controlled, so you can design parts around it without guessing. That\u2019s what we deliver. We\u2019ve worked with automotive brands, packaging companies, and even sports equipment makers, and every single one of them says our felt has half the shrinkage of the stuff they were using before. No more scrap, no more rework, no more headaches waiting for parts to stop moving after production.<\/p>\n

<\/p>\n

If you\u2019re tired of dealing with unpredictable shrinkage in your PET thermoformed felt materials, we\u2019re here to help. Whether you need custom thickness, specific shrink rates for your application, or just want to swap suppliers for something more consistent, reach out to us. We\u2019ll even send you a small test batch for free so you can check the shrinkage yourself. No pressure, no fine print\u2014just real materials and real results. We know how frustrating it is when your supplier cuts corners, so we\u2019re all about transparency here. You can ask for our latest shrink rate data for any thickness, ask for batch test reports, whatever you need to feel confident.<\/p>\n

Single Component Acoustic Insulation Materials<\/a> References<\/p>\n

    \n
  1. M. L. Fridman, Polymer Science and Technology: Non-Woven PET Felt, 2nd Edition, CRC Press, 2021.<\/li>\n
  2. S. T. Lim, Shrinkage Control in Thermoformed Polyolefin and PET Materials, Journal of Plastics Technology, Vol. 18, No. 2, 2020, pp. 45-58.<\/li>\n
  3. A. Gonzalez, Annealing Effects on Residual Stress and Shrinkage in Thermoformed PET, Polymer Engineering & Science, Vol. 57, No. 9, 2017, pp. 987-994.<\/li>\n
  4. International Organization for Standardization, ISO 1755:2018, Non-Woven Plastics\u2014Test Methods for Physical and Mechanical Properties, 2018.<\/li>\n<\/ol>\n
    \n

    Jiangsu Haokai Automotive Parts Co., Ltd.<\/a>
    As one of the most professional pet thermoformed felt materials manufacturers and suppliers in China, we also support customized service. We warmly welcome you to wholesale bulk pet thermoformed felt materials from our factory. If you have any enquiry about quotation, please feel free to email us.
    Address: No. 2 Kangyuan South Road, Xiayuan Town, Rugao City, Nantong City
    E-mail: pd@jiangsuhaokai.cm
    WebSite:     https:\/\/www.haokaiauto.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"

    What\u2019s up, folks? If you\u2019re in the packaging, automotive insulation, or even the shoe component game, … How to control the shrinkage rate of PET thermoformed felt materials?<\/span>Read more<\/a><\/p>\n","protected":false},"author":769,"featured_media":3514,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[3477],"class_list":["post-3514","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-pet-thermoformed-felt-materials-470e-94a912"],"_links":{"self":[{"href":"http:\/\/www.golfgalaxi.com\/blog\/wp-json\/wp\/v2\/posts\/3514","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.golfgalaxi.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.golfgalaxi.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.golfgalaxi.com\/blog\/wp-json\/wp\/v2\/users\/769"}],"replies":[{"embeddable":true,"href":"http:\/\/www.golfgalaxi.com\/blog\/wp-json\/wp\/v2\/comments?post=3514"}],"version-history":[{"count":0,"href":"http:\/\/www.golfgalaxi.com\/blog\/wp-json\/wp\/v2\/posts\/3514\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.golfgalaxi.com\/blog\/wp-json\/wp\/v2\/posts\/3514"}],"wp:attachment":[{"href":"http:\/\/www.golfgalaxi.com\/blog\/wp-json\/wp\/v2\/media?parent=3514"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.golfgalaxi.com\/blog\/wp-json\/wp\/v2\/categories?post=3514"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.golfgalaxi.com\/blog\/wp-json\/wp\/v2\/tags?post=3514"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}